Har du allerede haft dette produkt mellem hænderne? Har du villet slide det sønder og sammen? Andre bjergentusiaster bliver glade for din tilbagemelding - del den med dem.
Hvor høj en vægtbelastning kan produktet tåle og hvilke dimensioner e. g. Mål har det?
Adrian (Community)
| Kundeservice
08.12.2021 16:47
Hi Steen, Antworks do not state any information about load but they do state the following:
"Our contribution to training on the ground. Admittedly, we are not the inventors of these mini bars, but we have thought a little further and equipped the bars with two levels. This allows them to be used at two different heights. When set up, the bars have a height of 230mm for swinging legs and pelvis. If the Parallettes are placed on their side, they function as push-up handles, with a height of only 70mm. The lower height is particularly advantageous for pushing out into the handstand. As with our pegboards, the side plates are milled from birch plywood, the rods are made from untreated beech. The distance between the two plates is 450mm. The diameter of the bars is 40mm. After receiving the minibars, they still have to be screwed together. The matching stainless steel screws and screwdrivers are included."
Hi Steen, Antworks do not state any information about load but they do state the following:
"Our contribution to training on the ground. Admittedly, we are not the inventors of these mini bars, but we have thought a little further and equipped the bars with two levels. This allows them to be used at two different heights. When set up, the bars have a height of 230mm for swinging legs and pelvis. If the Parallettes are placed on their side, they function as push-up handles, with a height of only 70mm. The lower height is particularly advantageous for pushing out into the handstand. As with our pegboards, the side plates are milled from birch plywood, the rods are made from untreated beech. The distance between the two plates is 450mm. The diameter of the bars is 40mm. After receiving the minibars, they still have to be screwed together. The matching stainless steel screws and screwdrivers are included."